John Deere Chain Saw

John M

Well-known Member
I knew my Dad had at one time a John Deere chainsaw. It seemed to just disappear when he died, nowhere to be found. My uncle, who recently passed, had borrowed it and we didnt know he had it until yesterday. My aunt said it used it twice to cut down a couple of smaller trees, while waiting for his to be fixed, so I dont think he ran it much.)The trunks are still there, although pretty rotted) My problem is I cant find the owners manual in Dads "junk box", and the little tag on the gas cap is missing. It had the mix on it. Does anyone by chance know the mix for gas/oil on this chainsaw? I think it was 20:1. Im surpised this saw wasnt locked up. It has been siiting for at least 7 years, probably closer to 9.
 
Thats what I was thinking, thanks! Dad ran the daylights out of this saw when he got it, and I had the Homelite version of it until it got stolen some time ago. I have a newer saw that I use, but just wanted to get Dads running again, more for sentimentality, but to have a backup.
 
John M - I've had a JD 50V for many years. It's little on the heavy side but it's a good, reliable old saw.

The 50V manual and gas cap both say to use 20:1 fuel mix. However I find it's kinda smokey on 20:1. So for the last 10 or so years I've run it on 40:1 (which my other saws, weedwhacker, backpack blower, etc all specify) - the engine is holding up fine. I also run a gallon or two gas from my boat (50:1) thru it at the end of each boating season with no problems.

Incidentally I cut 8 - 10 face cord with the 50V every winter. And I always use good quality (usually Castrol) 2-stroke oil....
 
I do rememeber the smoke from this thing. I may try the 40:1 to see how itdoes, but looks like so far I have to get a carb kit for it. Lots of crud in there.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top