John Deere unstyled A engine work

[37JD]

I've been reading a lot on here about the options for the 2 bangers, and have a few questions. I have a unstyled a that I woul like to do some engine work on, I was originally going to put a newer crank in it but now am thinking about stroking it. When it comes to stroking it is there any setups that allow th use of the stock rods, what's a good stroke to go with? What are some good places to look at to get a crank stroked? What type of pistons are needed, custom or anything in production?
Thanks in advance

 

[BushogPapa]

Ask "JDB Puller" at "Extreme" and he will advise you well..
He can lengthen your connecting rods and even make you a new Block..!

I have seen some Early Unstyled JD "A" Pullers with sparkplugs in a new location..installed from the Valve-Cover end of the Block..along either Frame Rail..The originals are just dummies..!

 

[Little Big B]

(quoted from post at 17:34:17 06/21/10) I've been reading a lot on here about the options for the 2 bangers, and have a few questions. I have a unstyled a that I woul like to do some engine work on, I was originally going to put a newer crank in it but now am thinking about stroking it. When it comes to stroking it is there any setups that allow th use of the stock rods, what's a good stroke to go with? What are some good places to look at to get a crank stroked? What type of pistons are needed, custom or anything in production?
Thanks in advance

A common setup is 8 x 5.75.
Shoot me an email and we can talk more
Derek

 

[37JD]

Derek I would like to talk shoot me a message Since your email is off

 

[Little Big B]

Not sure how to turn it on, thought it was sorry. hot 125 honda at msn dot com

 

[jdnapuller]

I ALSO AM INTERESTED IN INCREASEING THE CUIBIC INCHES OF MY UNSTYLED A. ANY INFO?