Kubota hyd capacity

RLS-ia

Member
Hi all, I seen a 8200 Kubota near here worth the money, don"t know much about them. Would it have enough hydraulic flow to run a log splitter? I have a splitter I made that uses a 4 by 24 cylinder.
Thanks
 
I am guesing it is a small B model like B 8200 If that is the case you would be a little streched on total hyd but IF you got the splitter and tns full you might make it do. Would be easy to find a pto mounted pump and small tank then you could be sure things would work. Where are you located ? Have everything to make the external system cheap.
 
I'm in SW IA, yes it is a B8200, I'll go check it out tomorrow , I was wanting something to drag firewood-logs out of a timber. This one is already well used so scratches won't matter too much.
 
My wife's cousin has a B7800 he borrows my splitter, 4 X 24. He says is real slow but will split anything. He is running off the loader valve.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top