Led conversion for 200?

[Lucid]

Hello, I recently converted tractor (200) to 12v and want to change the sealed beams to LEDs. I have the flat back fronts and tear drop rear combo light.

I'd like to find a par36 sealed led beam that'll fit in the original housing if possible. Anyone done this? Have any part no.s?
I see Steiner has the whole assembly with 1500ish lumen LEDs, but not the bulbs. I have measured the originals, but all the online measurements are not helpful.

Also what would be a good beam type; spot, flood, or trapezoid?

Thanks for any help!

 

[BarnyardEngineering]

I bought some cheap 12W rated Par36 LED bulbs off Ebay recently. They look just like the old incandescent bulbs. Haven't tried them in a tractor yet but it's for science.

To make a PAR36 fit the flat back housing you need to shave/grind off the "key" on the back of the bulb.

 

[BarnyardEngineering]

Just installed one of the bulbs on my tractor. It's BRIGHT.

They are 120 degree floods, BTW.

 

[Lucid]

Thanks BarnyardEngineering, how did they fit in the housing? I have found some 750 lumen ones for about $15 each, looks like they might fit.

 

[Matt E.]

go to superbrightleds.com. I got the par36 from them for my SMTA, H and W-9. Worked great.