Loader bucket swap

[texfordfan]

I own a 703 loader and a I9-131 loader, are the buckets interchangeable as far as mounting points go?

 

[Sean in PA]

I can't say for sure but I don't think so. I9-131 is the frame for a 720 series loader, and the parts site lists different part numbers for the buckets on a 703 vs. a 720.

 

[Andy Wickiser]

I think 19-131 is a 712 loader frame not
720. My guess also is that they are not
interchangeable, bucket numbers are
different. If texfordfan owns both why
not measure and see.

 

[texfordfan]

because one of them is 450 miles away, so I'm looking for a shortcut

 

[Andy Wickiser]

By looking at pictures it looks like it may work. I can take the measurements from a 703, not sure which of yours is 450 miles away.

 

[texfordfan]

My 703 is the one I need measurements for. Center point to Center point of the top attachment points measure 37 on my I9-131

 

[Andy Wickiser]

That measurement is 37'' on my 703. The pins are 1''. The buckets look similar. I would say there:s a good chance it would work.

 

[texfordfan]

that sounds great, thanks so much for checking. I won't be around my other one until the end of October and that helps me make some plans.