Good afternoon. I know this is a tractor site,but here goes. Hydra mac skid steer left lift cylinder starts to move before the right one. Left one always completes it's movement first.
Right one eases along till left one reaches the end of travel, then speeds up. It is the same in or out. By the way these are the loader lift cylinders. The slow right one needed a seal
kit anyway,but did not make any difference. Even when connected to the loader the left one alway reacts first. I have bled both sides and cycled many times. What is going on
here?
Right one eases along till left one reaches the end of travel, then speeds up. It is the same in or out. By the way these are the loader lift cylinders. The slow right one needed a seal
kit anyway,but did not make any difference. Even when connected to the loader the left one alway reacts first. I have bled both sides and cycled many times. What is going on
here?