Loader System Identification

[Oak Ridge Eric]

Hi All,

I recently purchased a tractor with a front end loader and I notice it seems to have a type of quick attach system. The loader is 2 pieces and connected to the arms/plate with 2 pins on the backside. The loader arms/plate slide up into a welded on channel on top of the rear of the loader.

I'd love to get or fabricate other attachments for this but was wondering if anyone knows what this attachment type is. From there I could look for the spec or any additional helpful info. The loader arms are a Frey 6010S.

Here are some pictures.

Thanks in advance!

 

[Jim.ME]

I wonder if that is Frey's own system. Have you tried calling them? It looks like they are in Ontario as you are.

 

[paul]

Bottom of the document they talk about mounting a bucket and dropping in the wedge locks, so must be something they are still familiar with at the company?

https://tubeline.ca/frey/files/quicktach loaders manual.PDF

 

[Oak Ridge Eric]

Thanks both, I was able to contact the company that still supports Frey and they confirmed the details and sent me some documentation. I've located a local dealer that has some old compatible pallet forks.