Locks In Park

rusty6

Well-known Member
This JD 2140 will occasionally lock up in park and near impossible to pull the levers into neutral. Can be level ground with no weight pushing or pulling on the tractor so it should easily come into neutral. It takes numerous attempts. Does not matter if the engine is running or off. Just wondered if anyone else has that problem on these Mannheim built tractors or what it needs to fix it.
mvphoto62202.jpg
 
It helps to put the right hand gearshift in the 1st-5th position. Deere made a kit with a spring loaded gearshift on the left side and a bracket that you had to be in the 1st-5th position to go in park. Tom
 
Realizing that it's not the same series regardless of the similarity in numbering, our 2240 does the same thing, and has for most of the 30-odd years we've owned it. As it's been a good tractor otherwise, we've never bothered to tear it apart and possibly make it worse trying to "fix" it, as the solution has always been to slightly rotate the lever and it will drop into and/or out of park. It does have the lockout to prevent it going into park from any other gear other than 1st/5th. Again, not sure if this is directly applicable to your machine but it's been standard practice on ours for many years and has never shown any ill effects, so we've continued to do what works.
 
There is a method that should be described in operators manual to help get out of park. Engine
running and in correct gear and engage clutch slightly. I knew how to do it but have pretty much
forgotten. This was on like 20 30 40 series etc.
 
Thanks for the suggestions. The best one was probably to read the manual which I did. Indeed they do describe a method of getting the levers in and out of park.
Engage first gear. Move range lever to the left, then forward, then to the right.
To disengage, apply brakes, move range lever to the left, then back, then right. I will try this and try to remember to report back. We have been using this
tractor on the pto grain auger this harvest and its been great. Very economical on fuel. And so easy steering when it comes to lining up the auger over the bin
lid. Easy to reach controls from the ground having no cab.
 
Go forit, and stare at that muffler and rebuild that rps34 every 3 hours, and buy that ridiculous price oil and live with poor speed ratios in field and those weird hose apparatus hydraulic couplers for the scv,and a fixed lift arm link that is hard to hook up and stiff power steering, and very difficult to adjust rear tread spacing, and that rear mounted fuel tank that is hard to climb onto to fill with implement attached thing. Yeah, go buy a few cases.
 

Rusty6
Due that your tractor has a FEL have you considered tilting bucket down on the ground on its edge then gently move FEL control lever so to move tractor rear wheels enough to free gearshift park position. I don't remember ever witnessing a JD utility tractor being difficult to remove from park but do remember them being difficult to get into park position.
 
I had that issue with a 300TLB but I was on a hill making it bind into park. I had to use the loader or backhoe to relieve the pressure against the gears to get it out of park.
I like the later models with the hand brake for parking. Except I have a bad habit of forgetting about that lever and drive around or try to a bit before I remember the brake is on. LOL.
 
(quoted from post at 02:42:27 09/22/20)
Rusty6
Due that your tractor has a FEL have you considered tilting bucket down on the ground on its edge then gently move FEL control lever so to move tractor rear wheels enough to free gearshift park position. I don't remember ever witnessing a JD utility tractor being difficult to remove from park but do remember them being difficult to get into park position.
Yes, I tried the front end loader movement idea but it made no difference. My brother and nephew tried rocking the wheels which also made no difference. I'll be trying the "book method" later today when I move the tractor.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top