Long 610 4 cylinder - injector pump timing?
I had the injection pump and all the injectors rebuilt, engine has been rebuilt - new pistons/rings, cylinders honed, new rod bearings, and a complete gasket set- but I've got a rattle/knock that gets worse when rpms go up
Note: at idle, oil pressure is 25psi, revved up it's over 50p
1st 2: Top of the pump away from the engine all the way....
2nd 2: Top of the pump towards engine all the way....
si
I had the injection pump and all the injectors rebuilt, engine has been rebuilt - new pistons/rings, cylinders honed, new rod bearings, and a complete gasket set- but I've got a rattle/knock that gets worse when rpms go up
Note: at idle, oil pressure is 25psi, revved up it's over 50p
1st 2: Top of the pump away from the engine all the way....
2nd 2: Top of the pump towards engine all the way....
si
