looking for 1/4 inch canvas material

[JIM MALL]

.Been looking on the internet for some 1/4 inch canvas. Anyone know of a supplyhouse or shop that may have some.

 

[used red MN]

What would this be used for and what dimensions are you needing? When you say 1/4” it sounds like it would be more similar to belting and not canvas.

 

[JIM MALL]

I am looking for a piece that is on the feeder house on a 2166 ih combine. It is 36 inche by 2 1/2 inches. The material is 1/4 inch thick. Yes it is very similar to belting.

 

[casecollectorsc]

I am looking for a piece that is on the feeder house on a 2166 ih combine. It is 36 inche by 2 1/2 inches. The material is 1/4 inch thick. Yes it is very similar to belting.

Old round baler belt do the trick???

 

[RESLLS]

How about decommissioned fire hose? Might be able to get some locally. There's a 5 ft piece on ebay for $10.

 

[DanielW]

That thick is going to be hard to find. I'd also suggest baler belting or a nylon tow strap or lifting sling. Or you could try Big Duck Canvas. They have some pretty heavy canvas materials and are a source for canvas used when making new drapers for binders or pull type combines, but I'm a little doubtful they'll have anything quite that thick.

 

[Masseyharrisnut]

I am looking for a piece that is on the feeder house on a 2166 ih combine. It is 36 inche by 2 1/2 inches. The material is 1/4 inch thick. Yes it is very similar to belting.

Maybe Case IH still sells it.

 

[Duner Wi]

Could you get a Bull neck Strap or leather belt to work?

 

[DoubleO7]

I am looking for a piece that is on the feeder house on a 2166 ih combine. It is 36 inche by 2 1/2 inches. The material is 1/4 inch thick. Yes it is very similar to belting.

Maybe a nylon or polyester snatch strap? Might have to two layers sewn together to get the desired thickness.

 

[Hemmjo]

This seems to be what you are looking for https://www.monsterbelting.com/canvas-transmission-belt/

 

[Andy Wickiser]

I am looking for a piece that is on the feeder house on a 2166 ih combine. It is 36 inche by 2 1/2 inches. The material is 1/4 inch thick. Yes it is very similar to belting.

How about SBR belting from McMaster Carr. I used it to make a belt for my rock crusher - similar to a thick canvas. Thickest is 0.213 which is close to 1/4". See link.
SBR flat belt 2 1/2 0.213