looking for info/help on old plow

[ballison]

I have an old plow that was horse drawn. I suspect it may be an oliver. only thing I can find to identify it is an f326 in the shear casting. I'd like 3 things, 1 to know what it is, 2, the original colors, and 3 best option to get a good working edge again. Can I find a cutter for it, or should I have a welder build it up from hard face rod?

[/img]

 

[P I Pete]

Try ploworx.com he might be able to help you out.

Pete

 

[oliverkid]

It looks close to an Oliver. Do some wire brushing on the back
of the moldboard and land side. If it really is there should be
either an Oliver cast in it or the Chilled plow works logo cast in
it. As for the point, it?s a blacksmith point, when they got dull
you heated them up in a forge and hammered the edge back
sharp then re annealed it.

 

[Leroy]

Whitehorse bought the horse plow patterns that Ploworx did not buy. Cannot remember where located but is an Amish company.