Looking for upper Sos cable

[sony224422]

Anyone have the shorter one or any leads?

Or the longer conduit?

I bought a replacement cable and it s the longer one. I ll trade too if anyone wants ha

 

[JPK]

Arthur's Tractor 724-349-2015

Good people to do business with.

 

[Bern]

The short one is the lower one, the one inside the trans.

 

[sony224422]

Aren t there two lengths for the upper? I have two of them and one is definitely longer than the other one, unless im not putting it in the shifter correctly

 

[Greg NE]

What model tractor are you working on? The
601/2000's take a different upper cable
than the 801/4000's in the 4 cylinder
models.

 

[sony224422]

It s a 64 4000 4140 hd but it has the red transmission

 

[showcrop]

Still have them.

 

[sony224422]

(quoted from post at 05:50:01 02/13/23)

Still have them.

Hey, I ve emailed you a couple times, wonder if you re not getting them?

 

[Bern]

You didn't say what model tractor you have. Later tractors have a single long piece coming from the shifter
and a short stubby one, like about 6 inches or so, going into the trans.

 

[sony224422]

My apologies. It s a 1964 4 cylinder 4140 hd industrial with a red transmission. I bought a shifter for it (didn t come with one) and a cable came with the shifter. The end of that cable was damaged, and I had another cable I had purchased. When I compared the upper selector cables, the one I purchased is longer than the one that came with the shifter. I am now confused which is the correct length. I am wondering if the shorter one is for the 2000.

I have the lower cable, it seems like it is correct and is in good shape

 

[showcrop]

(quoted from post at 06:15:50 02/13/23)

(quoted from post at 05:50:01 02/13/23)

Still have them.

Hey, I ve emailed you a couple times, wonder if you re not getting them?

I have answered you.

 

[sony224422]

(quoted from post at 10:22:11 02/13/23)

(quoted from post at 06:15:50 02/13/23)

(quoted from post at 05:50:01 02/13/23)

Still have them.

Hey, I ve emailed you a couple times, wonder if you re not getting them?

I have answered you.

Hey Sir, I just sent you another email. Its strange I haven't gotten anything back. my apologies!!

 

[Greg NE]

Yes, the shorter cable is for a 601/2000.
The difference in length is needed because
the tin work is mounted lower on the
smaller model tractors than the larger
model tractors. Hope you are successful in
finding the longer cable.

 

[Greg NE]

Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

 

[sony224422]

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

 

[sony224422]

(quoted from post at 20:14:15 02/13/23)

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

I measured my conduit, it s 15". Is that for the 2000?

 

[showcrop]

(quoted from post at 20:14:15 02/13/23)

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

I Measured it at 14 and 1/4. I took the time to take a piece of soft copper and bent it to match, then straightened it to measure.

 

[sony224422]

(quoted from post at 10:33:17 02/14/23)

(quoted from post at 20:14:15 02/13/23)

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

I Measured it at 14 and 1/4. I took the time to take a piece of soft copper and bent it to match, then straightened it to measure.

Weird that is shorter than what I have. I also sent you an email with my phone number, hopefully you got it

 

[showcrop]

(quoted from post at 16:24:48 02/14/23)

(quoted from post at 10:33:17 02/14/23)

(quoted from post at 20:14:15 02/13/23)

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

I Measured it at 14 and 1/4. I took the time to take a piece of soft copper and bent it to match, then straightened it to measure.

Weird that is shorter than what I have. I also sent you an email with my phone number, hopefully you got it

I didn't get your email this time.

 

[sony224422]

(quoted from post at 10:31:29 02/15/23)

(quoted from post at 16:24:48 02/14/23)

(quoted from post at 10:33:17 02/14/23)

(quoted from post at 20:14:15 02/13/23)

(quoted from post at 19:57:57 02/13/23) Sorry, just reread your post. Hopefully all you need is the longer conduit. Then you should have the correct parts to make it work.

How long should the conduit be? I know it s a precise measurement, but it seems like people don t know there are two lengths. I tried searching for measurements but I can t come up with solid numbers

I Measured it at 14 and 1/4. I took the time to take a piece of soft copper and bent it to match, then straightened it to measure.

Weird that is shorter than what I have. I also sent you an email with my phone number, hopefully you got it

I didn't get your email this time.

I sent you another through here. Not sure what s going on