LP Gas

[dnd]

This is a follow up to an earlier post I had about where to start on getting an LP engine to fire off.
Here is a picture of the regulator on the engine,

 

[jnf]

Cold start procedure for these propane engines is with full throttle position and choke fully employed. On vapor to start.

 

[Ronnie Budd]

Have you tried starting it with the air cleaner on it and oil in the cup? Those systems like to see a vacuum across the mixer.

 

[Ill John]

It will fire on starting fluid if it's going to run,I'd try that to make sure the rest of the engine is working before looking at the LP system

 

[MMDEL]

(quoted from post at 20:19:44 01/17/21) This is a follow up to an earlier post

Did you try blowing and sucking on the red hose that was suggested to you. You should hear gas movement.
MMDEL