m5

[andi87]

I need a gasoline tank and a carburetor for a minneapolis moline m5. Where do i look?

 

[Jerry Grant]

Call Wendell Everett in Gnadenhutten, Ohio at 740-922-3335. He has a large MM graveyard as well as a lot of NOS parts.

 

[Alan K]

Does yours have a hole or crack in it? If it isnt too bad you might be able to use some sealer inside and some JB Weld on the outside. That is what I did with two of my tanks and they are holding just fine.

 

[andi87]

thanks for the help ours is lp gas and our gas company is not servicing tanks with wetlines any longer due to liabilty reasons in this sue happy world thanks again

 

[MinnieMoM5]

(quoted from post at 00:26:16 08/31/09) Does yours have a hole or crack in it? If it isnt too bad you might be able to use some sealer inside and some JB Weld on the outside. That is what I did with two of my tanks and they are holding just fine.

Alan,

I'm thinking of doing this exact same thing on my gas M5, as it is weeping fuel.

What kind of inside sealer did you use?

Did you have to take the tank off, or could you do it on the tractor?

I'd appreciate any details, thanks.

Jerry