M670 Loader Identification

[Caseboy1]

Hi guys, I'm looking for help identifying the model # of what I think is a MM loader. I'm mounting it on a M670. The guy that previously had it used it on a M670. It looks very much like a L800 except the loader arms set higher than the hood. I would consider it a high lift loader. Does anyone know of a high lift L800 or if this might be a different model? I'll try attaching a picture of a L800 brochure...This is my first time attaching pictures here, so here goes. Thanks in advance for any help.

 

[Ronnie Budd]

The L800 you have pictured is built by Schwartz.

 

[rrlund]

Any chance you have one made by Kelly? Take a look at the one in this CL ad. It looks just like the one in the brochure but it's a Kelly instead of a MM. Maybe they made a different model that was more of a high lift?
CL ad

 

[Caseboy1]

I'm not sure what kind of loader it is. I can't find any kind of serial or model # on it. It had Minneapolis Moline in yellow on the upper arms when I got it and there were some remnants of red paint on it. It's all rust colored now as it's been sitting out in the weather the past few years. I'm planning on painting it and mounting it back on the tractor in the spring. The tractor is in my shop right now for a differential thrust bearing repair. Hopefully can get it done soon. Thank you guys for the responses.

 

[MMDEL]

It is probably a Schwartz- MM. An original Kelly will have a weak yellow or black paint underneath.
MMDEL

 

[Caseboy1]

It does look like a Schwartz according to the images that I've seen on the internet. Is Schwartz still in business? Maybe I could contact them and by chance get some info about it.

 

[MMDEL]

What info do you need. Schwartz, MM, Oliver,Farmhand 225, and maybe a Ford model all the same. I have seal kits for the cylinders.
MMDEL

 

[Caseboy1]

I'm mostly just trying to verify which model I have right now. It's been several years since it's been on the tractor. It's good to know that you have seal kits for it. If they leak when I start using it, I'll be calling on you. Thanks.

 

[MMDEL]

Most of the loaders out there are L800. But If my memory serves me right at the end they did come out with a model L900. Which was larger and stronger. Seems like I have seen literature, but never seen a loader. Some one on here should have a piece of that literature.
MMDEL

 

[fastfarmall]

Schwartz was based out of Litchfield Minn, i think, but kinda doubt if there sill in business!!

 

[Caseboy1]

Thanks MMDEL, I never new about the L900. I would like to see some literature on it if someone that has any would be willing to share.