I have 3 molines that I pull, all have magnetos.
403 with 4210,s, 605 with 4231s, and an 800
With 4229s. All compression ratios are fairly
similar, but for whatever reason, upon shut down,
The 605 and 800 will diesel when I shut them down
, even when running race gas, and the 403 engine
doesnt, even running on just surpreme fuel. I have
messed with timing on the 6 cyls, adjusted carb,
adjusted cam/crank timing, and still, those both always
Diesel. Both run great, sound good, make good power.
Any opinions greatly appreciated here, thank you
403 with 4210,s, 605 with 4231s, and an 800
With 4229s. All compression ratios are fairly
similar, but for whatever reason, upon shut down,
The 605 and 800 will diesel when I shut them down
, even when running race gas, and the 403 engine
doesnt, even running on just surpreme fuel. I have
messed with timing on the 6 cyls, adjusted carb,
adjusted cam/crank timing, and still, those both always
Diesel. Both run great, sound good, make good power.
Any opinions greatly appreciated here, thank you