massy 44

[ghost-rider]

what does a 44 weigh, narrow front row crop..

 

[moline ub special]

depends on if it has the pressed steel wheels or the cast centers stock with pressed steel somewheres around 45-4600 i used to be able to get mine down around 4000 but she was stripped down pretty good hope this helps

 

[ghost-rider]

thank-you.

 

[OldMoIron]

Got mine down to 4100 with me on it and 4 gallons of gas, put wheel weights on and its right around 4430 most of the time.

 

[massey44 puller]

I got Mine weighing 3940 with me on it. And i weigh 300. Mine has all aluminium weight racks pressed wheels with 13.9 and stripped pretty good. Probly.could loose another 100 pounds or So

 

[OldMoIron]

what all did you strip, I must not have gotten it all

 

[bp4455]

ours stripped down on press steel and small front tires can make 4000 lb class. Our buddy has one with weld on hubs and post seat can make 3750 class.

 

[bp4455]

of course all this assumes you dont have live power. If it has live power that probly adds around 100 lbs. A stock 44 on pressed steel should make 4500 anyway.

 

[massey44 puller]

Stripped pto shaft, pto gear in transmision, belt pully assembly, I took generator off and replaced it with a idler pully and converted to 12 volt. Fenders are off put post seat, and any nut and bolt you can

 

[LarryM]

You can safely run the trans oil 2.25" low and the gears all lube properly.