massy ferg 1650

[farm it all]

this mower is a 1984 with 3 point hitch and pto will this run a snow blower ? can one still be got?the pto at tractor is femail what shaft fits is this a good tractor krowler 16 horse model of tractor is 1650 thanks

 

[Roger Ingram]

I've got the same tractor. The PTO is a 2000 RPM PTO. Any attachment that is rated for 2000 RPM will work.

I have a 48" snowblower and tiller, and it all works well.

 

[farm it all]

thanks roger does your blower have shaft for pto and does it push into back of tractor?are thease p t o shafts available ?does any other tractors use this same shaft, blower , tiller ect and does this tractor have enough power? thanks deane

 

[Roger Ingram]

I believe that the blower that I have was for the 1850,and was made to fit the 1650. I don't know what the difference is between the two models other than 18hp as compared to 16hp.

Anyways, the blower mounts on the back of the tractor and is lifted by the 3 point hitch (category 0). It is PTO driven by the rear PTO.

The Rear PTO uses a 1” involute spline with 15 internal teeth, rotation speed is 2000 RPM at rated engine speed. I believe that this is standard for any 2000 RPM PTO.

I also use the tiller via the PTO. So far, I would say that the tractor has enough power. But you could always use more power, right?

 

[farm it all]

Sorry to bother you again Roger. Is the blower you use on the 1650 a 1 or 2 stage also what rotation is the tractor pto? thanks deane ps I did not buy tractor yet .waiting to see what i can come up with for attachments.

 

[REXBEAVERS]

DO YOUHAVE A PTO ON THE FROUNT OF THE MOTOR . WHY KNOT RUN THE BLOWER OFF THE FROUNT . ITS ESE TO DRIVE FRONTWARD THEN TO BACK UP. I JUST PICK UP A BLOWER FOR A MAS AND SNAPPER . THEY ARE THE SAME.