MEl.

[deerelure]

MEl i talked to you sat at the trout run pull about putting the grooves in sleeves to use copper ring for a a head gasket. If you could give me a call i have a couple questions for you. 570-637 1419 thanks Jason

 

[mEl]

(quoted from post at 02:49:50 05/09/11) MEl i talked to you sat at the trout run pull about putting the grooves in sleeves to use copper ring for a a head gasket. If you could give me a call i have a couple questions for you. 570-637 1419 thanks Jason

Ok Jason, got you in my Cell contacts list. Will call. Don't know about you but I was impressed by the track Sat till the rain came. I seen quite a few tractors snuff out which I did not expect to, it really seemed to seperate the men from the boys and seemed to hold it's moisture good, Your thoughts? mEl

 

[mshultz]

Was hoping to see you there Mel... but I didn't stay long. Got there just as the rain (2nd storm I guess) started coming down. I wasn't familiar with the parking lot situation and should have just stopped as soon as I hit the driveway, but thought I'd get lined up with the rest of the trucks and trailers so when the rain stopped I'd be ready to roll since I was way late. Got stuck trying to pull around the far end of the lot to get a parking spot. Waited out the rain. Then the worse part of the day - had to get pulled out of the parking lot by a 2 cyl. JD. Decided to go down and see what the pull status was and check out the new facility. About the time I got down there I got called on the intercom to move my truck. Decided the heck with it - went to Wal Mart and fought the crowds at the Mother's Day card isle, then went home. Refilled the gas tank with $75 of fuel (which I had just filled before hooking up the trailer the day before).

Up until the rain part the day was working out just perfect - was able to work the FFA greenhouse sale in the morning, had help lined up to milk that night, and when I was getting there they were just getting to classes I could have pulled in - just as I had plannedfor it all to fit together..... until the rain. The facilities looked good. Hope to get to try them out another day!

 

[johndeereman]

mel went home to change his cloths just before you got there im really impressed with the work they did setting up the track just wish i could have hooked at least once to see how my tires are going to work on that track been real happy with them the couple places ive hooked at so far

 

[mEl]

(quoted from post at 15:18:16 05/09/11) mel went home to change his cloths just before you got there im really impressed with the work they did setting up the track just wish i could have hooked at least once to see how my tires are going to work on that track been real happy with them the couple places ive hooked at so far

Guys, Jerry said the pull will take up where it left off Sun. the 21st in case you hadn't heard, I thought that the treack held up well and kept it's moisture well, The clay sure seemed to put some tractors on their knees.

Jason, you could bring the sleeves along. mEl

 

[deerelure]

Jerry and the rest of the guys did a great job with the track and everything to do with the pulls. Running a pull with my family i know how much work goes into getting a track ready from year to year. So for them to put a track together that takes power like that one the first pull they did a really bgreat job.

MEl. I ran into a bit of a problem when i started checking all of my cleareances for putting the head flat on the deck without a headgasket. IF you are going to be at the make up ull the 21st I would like to pick you brain alil more about some of the problems. Thanks Jason

 

[mEl]

(quoted from post at 03:04:19 05/10/11) Jerry and the rest of the guys did a great job with the track and everything to do with the pulls. Running a pull with my family i know how much work goes into getting a track ready from year to year. So for them to put a track together that takes power like that one the first pull they did a really bgreat job.

MEl. I ran into a bit of a problem when i started checking all of my cleareances for putting the head flat on the deck without a headgasket. IF you are going to be at the make up ull the 21st I would like to pick you brain alil more about some of the problems. Thanks Jason

Ok Jason, I'll try to be there. mEl

 

[johndeereman]

what month mel? for may the 21st is a saturday just wanna make sure i show up the right day

 

[mEl]

(quoted from post at 16:21:38 05/10/11) what month mel? for may the 21st is a saturday just wanna make sure i show up the right day

JDman, hold up on that date cause jerry told me it was Sunday cause only open date, maybe the 22 May, I'll post back w date. mEl

 

[deerelure]

Trout run is makeing the pull pull up the sunday the 22nd.

 

[mEl]

(quoted from post at 02:46:50 05/11/11) Trout run is makeing the pull pull up the sunday the 22nd.

Tnx for the clarification Jason, mEl