MF-102 loader

[Stan Coryell]

I have a 102 loader, no name plate. Do
these share any parts with a 245? I need a
lift cylinder, spool valves and a bucket.
One of my lift cylinder needs a re-chrome
and repacking, has anyone found a good
replacement? Spool valves are about shot,
I found a good replacement from Prince.
Bucket is only 4 ft, before I rebuild it I
was curious if any of the parts from a
245? Will swap over. There are two on
Facebook Marketplace.

Thanks,
Stan

 

[WorkmanVT]

(quoted from post at 22:52:25 11/02/21) I have a 102 loader, no name plate. Do
these share any parts with a 245? I need a
lift cylinder, spool valves and a bucket.
One of my lift cylinder needs a re-chrome
and repacking, has anyone found a good
replacement? Spool valves are about shot,
I found a good replacement from Prince.
Bucket is only 4 ft, before I rebuild it I
was curious if any of the parts from a
245? Will swap over. There are two on
Facebook Marketplace.

Thanks,
Stan

I have 102 loader on my MF-65 that come from my grandfather. Both the tractor and the loader need a lot of work so I am curious if the parts from a 245 will work.

Thanks.

 

[Stan Coryell]

I gave up on that idea. I picked up a 6' bucket off a kubota the other day. I plan on swapping the clevises off of mine. The lift cylinders do not look to be the same as a 245?. I found 2" x 30" cylinders on Northern's web site that looks workable. I replied to you in the other thread about the spool valves. After looking into this, I feel it's a waste of time and money pursuing the original equipment.

I'm currently putting in a driveway at my place. In a month or so, I hope to swap out the spool valve. I'll let you know how it goes.

Good luck.

 

[WorkmanVT]

(quoted from post at 00:09:19 11/08/21)
I gave up on that idea. I picked up a 6' bucket off a kubota the other day. I plan on swapping the clevises off of mine. The lift cylinders do not look to be the same as a 245?. I found 2" x 30" cylinders on Northern's web site that looks workable. I replied to you in the other thread about the spool valves. After looking into this, I feel it's a waste of time and money pursuing the original equipment.

I'm currently putting in a driveway at my place. In a month or so, I hope to swap out the spool valve. I'll let you know how it goes.

Good luck.

Thanks for the reply. Just getting started on this project so any and all information is appreciated.

My bucket is in decent shape so I plan to keep it.

Good luck with yours too.