MF 30B Stabilizers

[laheavy]

Tractor S# 9A329202

I'm having trouble finding the left and right adjustable stabilizer assemblies. The MF part # is 10234A91 (left) and #10233A91 (right). My MF dealer can get me all the pieces at an outrageous price naturally.
Is there an aftermarket possibility here for these? Or maybe something that will work?

Thanks,

Jeff

 

[Caryc]

(quoted from post at 14:48:14 01/22/19) Tractor S# 9A329202

I'm having trouble finding the left and right adjustable stabilizer assemblies. The MF part # is 10234A91 (left) and #10233A91 (right). My MF dealer can get me all the pieces at an outrageous price naturally.
Is there an aftermarket possibility here for these? Or maybe something that will work?

Thanks,

Jeff

Sorry, I don't know what a model 30B is. But I've got a Ford 8N and a MF202 workbull. The 202 is the industrial model of the MF35.

The stabilizer bars will interchange on both tractors. The holes are 31 1/2" center to center. I purchased one adjustable bar and one straight bar from Tractor Supply Company. I don't know why you would need two adjustable bars. I hook the plain bar up first them adjust the other one where it's easiest to hook up. Then adjust it to center the implement.

If you check out TSC they call them "stabilizer arms" when you search. But you said you need the "assemblies" so I don't know if that means you need the under fender mounting brackets or not.

 

[Tom from Buckeye Lake]

I purchased adjustable ones also
from TSC for my 150. That way I can
get scraper blade offset to both
sides. My blade doesn't cover wheel
width.

 

[CitrusGrower]

I know what a 30B is because I've got one. Stabilizer Assembly sounds like an expensive word for a pretty simple piece of metal.

I'd get one fabricated or go after market.