MF 590 rear wheel nuts

[James_1967]

Will the rear wheel nuts used for the PAVT rims also work with the pressed centres?...or need to get different ones?

 

[DavidP, South Wales]

Hello, in a word, no. PAVT wheel centres
have a hexagon nut with a 'tube' attached
to it. The nut has an internal thread to
fit the stud. The outer plain diameter
corresponds to the hole size in the
centre. The nut has a seating under the
hexagon. PAVT nuts will have no seating
to make contact with the pressed cetre.
DavidP, South Wales

 

[James_1967]

OK, many thanks Dave