MF 65 electric pump

Bypassed mechanical fuel pump on MF65 with an electric pump, however, not sure where to connect the positive wire.
Welcome to the forums.

It helps if you give complete info on your tractor. A MF 65 used several engines (including 2 variations of the diesel), which affects the electrical system as well as the fuel system. I am going to guess you have a diesel as I think that is the only one that used a lift pump. If you have a MF 65 with a diesel it originally did not have a key switch. There is/was an oil pressure switch located in a tee mounted to the inlet fitting of the oil pressure gauge. That oil pressure switch was used to turn charging and the fuel gauge on and off. If your tractor is still wired that way you need to power the electric pump you added. Depending on the amperage draw of the pump, you might need to install a cube relay controlled by the oil pressure switch to power the pump. Do you have an ignition switch or just a start switch?
 
Thanks for the info. My MF 65 is diesel powered Perkins engine. It has an ignition switch and over the years has had many changes to the tractor. I changed the generator to a one wire alternator when I first purchased it in 1999.
 
Thanks for the info. My MF 65 is diesel powered Perkins engine. It has an ignition switch and over the years has had many changes to the tractor. I changed the generator to a one wire alternator when I first purchased it in 1999.
If someone has installed an actual ignition switch, not just the key type of starter switch (which I believe was original), you can power the pump from the ignition terminal of the switch, as long as you remember to turn it off when shutting the engine down.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top