kroddy3293

New User
Well, after getting all the small stuff finished that my tractor tech missed, I drove it around the farm a bit today for a few chores.

I discovered a discharge/blowback type sound coming from cylinder #5. It appeared my young tech doesn't have the rubber boots properly seated.

My favorite observation was a bit of fuel pooling at the bottom of the freshly built injection pump....

Oh well, something else to do.

Ken
 
If you have a compression leak at the injector it's NOT the rubber seal, that's for dust only. The hiss you hear is the copper sealing washer in the head injector bore.
Either the injector is loose or the hole was not clean for the copper gasket to seal. The injection pump area leak might be the return line grommet needs tightened at the
injection pump drive end.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top