MF235 oil pump

I planned to check the bearings while in there. Just wasn’t sure how much of the front had to come off to access the gear drive part of the pump. Is this one that you have to loosen the engine to transmission bolts to make a little room to slide the pan out ?
 
You can take it off without pulling anything but the pan just grind down a 13/16 wrench to get
Main cap off can look at that bearing first 😉🚜
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top