MF32 loader fluid?

[SkyePN]

Slowly getting this old girl working... My 135 has a MF32 loader with the reservoir in the right hand frame and it's own pump on the front PTO.

I pulled the vent tube and dipstick today and it's very low. What fluid should it be filled with?

This will be clearing snow a few times in the winter, if that matters. Done some searching and getting conflicting info. No idea what's in it currently, will probably drain what's left and refill.

Thanks again.

 

[Frank Dozer]

I have the same loader MF32 on my Massey MF20 and the fluid I
used was at Tractor Supply. Meets all the Massey specs.
Traveler Premium

 

[Frank Dozer]

I need to revise my reply. I said it meets all Massey specs. I retract that statement.
It meets MF specifications:
M-1110
M-1129A
Plus other specs listed on the back label.

 

[Harper]

I have that loader on my 20C, the owners manual calls for SAE 10w oil. However like I am also using the TSC Traveller Premium in my 32A.

 

[Frank Dozer]

From the owners manual:

 

[Farmer Rock]

I use Tsc premium as well in my mf200 on a 203 workbull,it's good oil,and good priced.

Rock

 

[SkyePN]

(quoted from post at 06:20:48 10/05/20) I have that loader on my 20C, the owners manual calls for SAE 10w oil. However like I am also using the TSC Traveller Premium in my 32A.

Thanks everyone, we don't have Tractor Supply but my local store has universal tractor trans/hyd fluid, I'll check it meets M-1110
and M-1129A. Nice to just have one fluid for the transmission, power steering, and loader reservoirs.

 

[Jim.ME]

(quoted from post at 15:20:22 10/09/20)

(quoted from post at 06:20:48 10/05/20) I have that loader on my 20C, the owners manual calls for SAE 10w oil. However like I am also using the TSC Traveller Premium in my 32A.

Thanks everyone, we don't have Tractor Supply but my local store has universal tractor trans/hyd fluid, I'll check it meets M-1110
and M-1129A. Nice to just have one fluid for the transmission, power steering, and loader reservoirs.

Permatran III is Massey's current spec. It covers M1110, M1127A & B, M1129A, M1135, M1141 & 1143. So an oil meeting Permatran III requirements is ok as well.

 

[SkyePN]

(quoted from post at 12:58:49 10/09/20)
Permatran III is Massey's current spec. It covers M1110, M1127A & B, M1129A, M1135, M1141 & 1143. So an oil meeting Permatran III requirements is ok as well.

M1141 = Permatran III?

In addition to the cheap universal tractor fluid they sell (made by Warren Oil, still trying to find spec sheet), they also have Shell Spirax S4 TXM which says it's suitable for Massey Ferguson M1143 (Obsolete), M1145.

Do you know if M1145 also includes M-1110 and M-1129A?

 

[Jim.ME]

(quoted from post at 16:32:50 10/09/20)

(quoted from post at 12:58:49 10/09/20)
Permatran III is Massey's current spec. It covers M1110, M1127A & B, M1129A, M1135, M1141 & 1143. So an oil meeting Permatran III requirements is ok as well.

M1141 = Permatran III?

In addition to the cheap universal tractor fluid they sell (made by Warren Oil, still trying to find spec sheet), they also have Shell Spirax S4 TXM which says it's suitable for Massey Ferguson M1143 (Obsolete), M1145.

Do you know if M1145 also includes M-1110 and M-1129A?

I say yes from what I see. I believe M1145 replaced M1143, so it would replace M1110 by default, since M1143 shows as replacing M1110.

 

[SkyePN]

MF 32 owner's manual arrived in the mail today. The official recommendation is M-1110A

[/img:d6586ff9c3]