Mid Atlantic Pull

[mEl]

The Mid Atlantic pull at Harrisburg is coming up in a couple weeks. Last years pull was a great time with pullers from all over the East in attendance. Come and pull against some of the best tractors from the East and Northeast. There will be classes for everyone with common sense rules. It is indoors so weather will not be a factor unless it hinders travel. Brad and his crew do a fine job so come out and support them. mEl

 

[johndeereman]

Im planning on going haven"t been before would like to try it

 

[Dieselbear]

See you there mEl, bringing the GVI
Glenn

 

[mEl]

(quoted from post at 04:30:50 11/09/11) See you there mEl, bringing the GVI
Glenn

Glenn, family concerns may keep me from the event this year, my BIl and his wife are in from S.D. and they may have the evening planned. Hopefully I can get part of the day in at least, I'm only 1.5 hrs out so we'll see. Really don't want to miss it as our builds have done extremely well with some top placings and a Jackpot win last year and nice to see those do well, more important than that however is the chance to meet the "cream of the crop" from the East/ Northeast and compare notes. Brad and his crew are first rate at organizing this pull, making common sense classes, allowing good competetion without nitpicking tractors, you bring it theres a class for it. Everyone come out and enjoy what is being offered to you.

Glad to see that you are coming JDman, you should do well, didn't get to talk to you last weekend at Trout Run, was busy running scraper a while. mEl

 

[hotrod60]

Does anyone know if the smoke ventilation is going to be any better this time the fumes got really bad I thought its a good show just hate driving home with a headache from the smoke

 

[Brad Peters]

I wish I could say that the ventilation will be better. We'll be using the same pto driven fans. If we could keep the doors closed to create a draft, it would work better. The scales will be inside the arena as you enter the track. We'll allow only about 5 or 6 tractors on each side over and into the arena-this should cut down on fumes and noise. It is a concern, but we are doing the best we can with the facility. Hope everyone can come out and support the pull!
Untitled URL Link

 

[VicS]

I would like to come, its a little far and the any cut tire class is a little fast for me. But if everything would work out and I get the little 435 back together and started I will do my best to show up. Vic

 

[Lamont]

Hey mEl. Sure wish someone would take some videos and put them on You Tube. Y'all have fun.

 

[jd b puller]

(quoted from post at 19:12:38 11/09/11) I wish I could say that the ventilation will be better. We'll be using the same pto driven fans. If we could keep the doors closed to create a draft, it would work better. The scales will be inside the arena as you enter the track. We'll allow only about 5 or 6 tractors on each side over and into the arena-this should cut down on fumes and noise. It is a concern, but we are doing the best we can with the facility. Hope everyone can come out and support the pull!
Untitled URL Link

Brad, what's the RPM rule in the various classes and Jackpot classes?

Thanks

 

[mshultz]

None, but blankets ans shields are required if running over 20% RPM if I remember correctly.

 

[Dick W.]

I can't come but I would like to if there is secure parking for our truck so the tools and parts don't walk themselves downtown? Hope to get there next time.

 

[jd b puller]

Thanks, we"ll plan on coming next year.

 

[VicS]

Brad can you post the exact address? I would like to google it and see how far it is. Thanks Vic

 

[Dick W.]

Go to Google maps, Harrisburg, Pa. N Cameron and McClay St also N Cameron and Wildwood Park Dr.

 

[VicS]

Thanks Vic

 

[AJBpuller]

Is there going to be 2 fans or is one of them going to be that home made one from a propeller, cause that thing made more noise than it did help sucking out fumes.