Mini Excavator Greasing

John P.

Well-known Member
I recently picked up a cheap mini excavator to do some landscaping work around the property and I'm going over everything before I put it to work.
I'm a little confused if I should go with an EP2 grease or a Moly grease since it's all pins and bushings.
 
I'm planning to pick up a case of grease to have around for it and was wondering if it should be moly or EP.
 
I bought a 1 foot bucket for a specific job. The place I bought it from said good luck pulling the bucket pins on the old bucket. Since I have always greased them often pushing the dirt & water out of the bushings, the pins came right out with one finger with little effort. So I agree that greasing more often is more important than what type of grease you use.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top