MM disc

[NDCurt]

Working on a MM disc. Suggestions for parts. Thanks

 

[MMDEL]

What model disk? What parts?MMDEL

 

[NDCurt]

(quoted from post at 21:16:33 03/22/21) What model disk? What parts?MMDEL

No idea on model probably will need a bumper and the bearing assembly which doesn't really have a bearing. Also need some blades which I think must be 18 inch as the current ones measure about 17 plus.

 

[Ill John]

if it has a 4 bent pipe for the lift/axle, its a UO model. If it's more conventional, you'll need to ID it.The reason I am thinking UO is because they use wooden bearings, and you say not really a bearing

 

[NDCurt]

Looks like it must be a UO

 

[MMDEL]

Yes it is a UO. I don't have any wood bearings left. But I could help you out with used blades that measure the same as what you have for a match.
MMDEL

 

[NDCurt]

Would you have an end piece? Part # B3624A

 

[molinegb]

Number crosses to 20H3195 or 20H4338 Called a bumper. Fits KA,KAC.UO GO

 

[MMDEL]

Not sure I will check
MMDEL

 

[MMDEL]

(quoted from post at 23:46:30 03/25/21) Not sure I will check
MMDEL

Sorry I didn't find out yet. Going to today
MMDEL

 

[SWMolines]

Do you have the part number from those rocks? :lol:

 

[MMDEL]

Sorry I didn't find out yet. Going to today
MMDEL[/quote]

Sorry again I don't have that Bumper
MMDEL