MM grain Drill

pat sublett

Well-known Member
Looking for parts for a MM P3-7 grain drill. Missing a couple of springs that puts pressure on the disk as well as some chutes.
 
My dad's uncle parted out a couple mm grain drills years ago. I'm sure there is down pressure springs over there someplace I'd have to look. I know his drill was a double disc opener with the tall steel wheels on the ends of the drill. I would venture to guess the springs on the openers are the same on most of the units. If you thinks these might work for you let me know and I'll go do some digging and see if I can find some of them. My email should be open drop me a message and we'll go from there
 
(quoted from post at 08:50:36 04/05/18) My dad's uncle parted out a couple mm grain drills years ago. I'm sure there is down pressure springs over there someplace I'd have to look. I know his drill was a double disc opener with the tall steel wheels on the ends of the drill. I would venture to guess the springs on the openers are the same on most of the units. If you thinks these might work for you let me know and I'll go do some digging and see if I can find some of them. My email should be open drop me a message and we'll go from there


I'm looking for a couple meter castings that go on the bottom of the seed box. I broke one trying to get the dang thing un-stuck.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top