Mohawk 507 help

[Vervaen]

Need help with fathers Mohawk 507 mower (attaches to Ford 8N)
Father in early stages of dementia & can t seem to remember how to raise mower deck OR, he s attached something wrong.
Clutch is in, lever on left side under seat is to rear & PTO lever towards rear, not raising.

Anyone have or know where I can find image of what the 507 looked like new (or close to new), or owners manual?

If I can figure out how to upload photos, I ll post what he has.

Also, what is the small lever under right side of seat for?

 

[paul]

So you have questions on the tractor, not really the mower.

I?ve not actually ran an N swries, but they use the lever I circled in blue to raise and lower the three point.

They do not have live hydraulics, so you need the clutch out in order for the hydraulics to work. (You end up shifting to neutral a lot to operated the hydraulics if you
want to do stuff while not moving.)

Im not sure on the little lever that could be part of the different hyd options someone smarter will be along....

Paul

 

[Tx Jim]

To hydraulically raise 3 pt on 8N PTO must be turning to power hyd pump.

 

[Jim.ME]

As noted by another poster, your questions are about the tractor not the mower/cutter. Here is a link to the company that makes Mohawk equipment now. They don't show a manual for a 507 but you could contact them if you want to try to get a manual for it, they might have something in archives.

http://www.ag-meier.net/

If your plan is to keep the tractor you should get a set of manuals for it (if your Dad doesn't have them). If you post down on the N series Forum someone will help you fully identify it and the proper manuals to get for it.