Moline z puller

[Modeere]

Anyone have any intake manifold knowledge of what would work best? Z-lp, 335-lp, or gas 335. Using straight up exhaust and about 250 cube.

 

[rpllr]

Z l.p. is hard to find but would work
good, I have used a 302 l.p. manifold
and made an elbow to turn it down for
the carb. You have to re-work the
linkage a bit.

 

[Modeere]

Thanks for the info. I checked into the manifold that's on it. It's a u302 with a fabbed elbow already. It has an original exhaust manifold for an r. I have a vertical exit coming. I may send the cylinders out for some port work this winter.