Motor I'd

[MHfreeman]

Looking for a b427 motor for in a 44 found this motor in a gen set trying to ID it the tag was missing from what I can see it appears to be on

 

[Dieseltech]

If I recall the B427 was in the self propelled Fox chopper too.

 

[MHfreeman]

I attached a photo up higher on the massey forum of the oil filter side. But can't of the manifold side would you beable to ID it off two pictures roughly

 

[Dieseltech]

Is there two exhaust pipes? The B427 I had for a project MH 44 had two. You might be looking at a smaller M330/363 motor or smaller yet F 186/226/244..

 

[MHfreeman]

There was only one that I saw on it it has a manifold with an expansion joint at 3 and 4 cylinder. It's not allowing to post pictures of it could I email you some that I got of it?

 

[Dieseltech]

Sure, send to [email protected] and I'll check them out.

 

[Roger Link]

There is a 427 flat head motor on wisconsinsurplus.com today, iys an online auction that anyone can register and bid on, its in Clintonville Wisconsin, shown as low hours and natural gas