Mounting a loader on a WD-Help

[Keith Molden]

I've got an AC loader made by Freeman that I took off a WD last year, sold the tractor. Now I want to put on another WD, but with my poor memory, I can't for the life of me remember where the lines connected. There is a remote control valve for it and it has a trip bucket. Think this old age isn't all it's cracked up to be. Guess I need to take more pictures but would forget where I put the camera LOL. Any help would be greatly appreciated. Thanks and Merry Christmas. Keith

 

[bg/mo]

most plug into the remote at rear of tractor

 

[NEKS]

My WD loader had single acting cylinders so each had one hose and tee'ed together and to remote line that run beside seat base to rear of tractor.

 

[JMS/.MN]

If you do not have a remote under the seat....look at the top of the hyd valve assy- where the two hoses from the lift cyl attach- there is a third port. I should be to the (left?) front of that casting. That port is where the remote line would attach- you can remove the plug and add a hose connector there.

 

[JMS/.MN]

BTW- you don"t need that extra remote valve- just hook the hose to the port and use the lift lever to activate the loader.

 

[Keith Molden]

Thanks guys, sure do appreciate the memory jog. I'll seee if I can get it hooked up this weekend when I get home. Need to spread some horse apples if it freezes up a little. Keith