multi power seals

[old mf]

i have mf 65 with multi power and i was getting oil in the clutch housing area. I split the tractor and the massey dealer seemed to think it was the seals on the input shaft to the transmission were the multi power parts are. I got the input shaft retainer off but cant get the seals out of it. The i&t service manual mention the need for a special massey tool called a "nuday puller". Any help or ideas is appreciated. Thanks

 

[john d g]

my MF50 should be the same---i was able to get my seals out with a loooong pair of 90* needle-nose pliars---seals have to squeezed together so u can slide them out----good luck john

 

[john d g]

my MF50 should be the same---i was able to get my seals out with a loooong pair of 90* needle-nose pliars---seals have to squeezed together so u can slide them out----good luck john

 

[old mf]

These seals have a metal ring around them and if i squeeze them they'll bend.