Must be Monday!

kcm.MN

Well-known Member
Location
NW Minnesota
Puzzle: https://jigex.com/DCXzK

mvphoto85731.jpg
 
I can't remember all the details, type of tractor. I talked to a man with a landscaping business and he had the same problem hanging a hoe and front bucket to his tractor.

On the dairy we had a pipe loader on a Farmall H. No frame on H. Broke it in half, cracked the bell housing.
 


Three point hoe with no sub frame, and the hoe is big for the tractor. Hopefully the dealer had the buyer sign a release. It would take plenty of luck for any color tractor to stand up to that.
 
The very reason I will not have a loader that does not go back to the rear axle to fasten and needs to be held by the side near rad. Stress is then transferred to the axles not the middle of the tractor on castings.
 
I've seen several of those chinese tractors
broken in the same place. Don't remember who
made them, but were sold under many
different names. Tractor King, Foton, Jinma
and NorTrac are some that come to mind
 
I do not feel that is a Chinese tractor problem.
The same thing would happen to a green or red tractor if the hoe and loader used the same mounting.
Like caterpillar guy said if you want a loader and or a hoe they need to be mounted to a frame rail that runs from the front
axle to the back axle. Expecting a cast bellhousing to stand up to the punishment a loader and hoe can inflict is just crazy.
 
(quoted from post at 09:58:21 12/13/21) I do not feel that is a Chinese tractor problem.
The same thing would happen to a green or red tractor if the hoe and loader used the same mounting.
Like caterpillar guy said if you want a loader and or a hoe they need to be mounted to a frame rail that runs from the front
axle to the back axle. [b:4d3dbde011]Expecting a cast bellhousing to stand up to the punishment a loader and hoe can inflict is just crazy.[/b:4d3dbde011]

Exactly.
 
I agree SV--I had a Kelly 70 3 point backhoe on my Deere 3020 for years--Had a Mom and Pop tile business--used and abused it a lot--NO problem! Ya get what you pay for!!---Tee
 
Hate it when that happens! Operator is going to need some long arms! My backhoe is on an Oliver 1650U sort of. It has a heavy
square tube down each side that the backhoe and loader is mounted to.
 
I wonder if he had a big log hooked in the backhoe so he could lift an even bigger log with the bucket.
 
A few years ago there was a guy that posted on here about breaking
his John Deere in half with just a loader. I think it was a 4430 but not sure.
It had duals on the rear, 2 WD, and about 600 lbs of weights on each side of the rear axle.
From the pictures, it looked like it snapped both the transmission and the rear of the engine.
I believe he was trying to dig out stumps or trees with it?
That's all from memory, which isn't as valuable as it once was! lol
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top