Need a part for a Super A

[DLJ in NC]

Hello,

Not sure where else to find the part I need. I need the piece that connects the lifting arm to the rockshaft. Looks like a circle that slides over the rockshaft with a bolt attached that bolts thorugh the lifting arm. Can anyone lend some assistance. My email is [email protected]

Thanks,
Donnie

 

[Dave Sherburne NY]

Not sure what you mean so you will have to look it
yourself

http://www.caseih.com/parts/parts.aspx?navid=123&RL=ENNA
A parts book

 

[DLJ in NC]

Dave,

didn't find the exact part number, but the part manual is showing a super A from 1953 as having a fast hitch. The part that is very similar and would probably connect my lifting arms is the 520066R1 PIVOT TRUNNION, lift link. Hope this helps sort it out.

Donnie

 

[ScottyHOMeY]

Try Glen at Little Red Tractor Company.

 

[Daniel H.]

The part you need is 515 226 R91. It is still a good number from CNH but is its $86.00. Depending on where you are in NC you might try SA Fitts in Danville, VA.

 

[SuperA-Tx]

Donnie,

Im not positive on this but what I know on my SA and our 140's is that the lift link is a bigger rod when you have the fast hitch and thus the pivit trunion would be larger.

If yours didnt come with a fast hitch your rod is probly around 3/4" outside diameter and if it came with a fast hitch it is probly around 1" diameter.

I bet that little part might be hard to find if it fits on the small rod. You might see if someone can fab you one, it isnt that complicated of a part.

 

[Daniel H.]

515 226 R91 is for the smaller rod, the tractors without fast hitch. You have to look in the implements part manual instead of the tractor manual. The rear rock-shaft and linkage is considered a " common unit" and was sold with an implement.