Need Help Decoding Ford/NH ID Tag

[Roger That]

I looked at a Ford New Holland that has been converted to a floor scrubber by Clarke and am considering converting it back to ag use. The tag under the hood reads:
Tractor Number: *BD87857*
Model: CA64C
Unit: 5B01B
Engine: BB526902 5A23
TRansmission: 5A26B
Rear Axle: 5A06B
Hrdraulic Pump: 5A04B
Hydraulic Lift: 5A31B

Stamped on bell housing is:
SBC146
CA6P4C
5B01
*BD98857*
The tractor is a 3cyl gas with 4sp high/low tranny.
Any info is appreciated.

 

[Jerry/MT]

I don"t know waht all the codes mean but here"s what I do know.
BD87857 is the serial number and the B indicates it was built in Basildon, UK.

In the Unit Number 5 means 5th day, B means February, 01 means 2001 and B means the B shift. SO you tractor was assembled on February 5, 2001 during the 2nd shift.

The rest of the codes indicate the model number, pump, transmissions, etc

 

[mhb@ufe]

There seems to be a digit missing from the model number(CA?64C)
C = 3000 series
A? = 3910 or 3930
6 = gas horizontal exhaust
c = 8x2 manual transmission
If it's a 3610 it's an 85
If it's a 3910 its a 95

Mark

 

[mhb@ufe]

5B01B
5 = 1985 or 1995
B = February
01 = Day of the month
B = Day shift
The missing digit in the model number is needed to complete ID


Mark

 

[mhb@ufe]

I didn't look back far enough
Missing digit
1 or 2 = 1975 3600
4 = 1985 3610
5 = 1995 3930

Mark

 

[Roger That]

You are correct. I missed putting in a digit on the model#. It should read CA6P4C

 

[Roger That]

You are correct. I missed putting in a digit on the model#. It should read CA6P4C

 

[mhb@ufe]

That doesn't match any model code I have.
CA?64C is what I would expect it to be.

Mark

 

[Jerry/MT]

Thanks for correcting me.