Need help. King kutter gearbox gears

TreeFarm

New User
I have a old orange color 5ft king kutter finish mower. The 15 tooth gear in the gear box stripped out a few teeth. It has a key slot.
I can't find the replacement gear. any help would be appreciated. Thanks [/img]
mvphoto81424.jpg


mvphoto81425.jpg


mvphoto81426.jpg


mvphoto81427.jpg


mvphoto81432.jpg



This post was edited by TreeFarm on 09/06/2021 at 03:16 pm.
 
The large gear may look good, but when there is a catastrophic failure like that, there could be
unseen fractures in the gear, even the shafts and housing could be stressed or cracked.

I would be more inclined to look for a replacement gear box. Might even find a generic box that
could be adapted to fit.
 
There's a KK finish mower gearbox on Ebay for $200 code 184000. $33 & chng. shipping. Also, I found a great source for finishing mower parts: highgrademfg.com. Mostly
yoke,wheel,tailwheel, and spacers. I have a Buhler finish mower that blades and wheel parts are hard to find and expensive.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top