As most you know I got a vac14 .. son drove it around some and parked it .... I decided to put it in the shop and change fluids and check it over ....
I drain the oil and it was dark so I put my little finger up the drain hole and it had some sludge in the pan by the hole ... so I got some Diesel poured a quart or 2 down the oil fill and rocked the tractor back and fourth .. did this off and on ... after the 3rd time the diesel came out pretty clean ...
So I put oil in it today .... changing the plugs and thought I would check compression ...
will the engine is froze .... can't turn it over with the crank so I put it in 4th and try rocking ... nothing .... try putting it in Reverse .... nothing ..
<>
SO WHAT CAN I DO ?? WHAT CAUSE THIS ??? I'm not wanting to tear the engine down , unless that's what has to happen ....
I'm just confuse how this could happen .... since we did drive it around ..
<>
ANY advice will be really appreciate ..... Thanks .... mark