need lower track roller

[ac 653]

I am looking for either a new or used lower track roller for an AC 653 dozer

 

[Rays]

I need you to take some measurements off of your rollers, Like Diameter, Width, space between bolt hole centers. I may be able to come up with some for you. Let me know, Thanks, Rays

 

[NCWayne]

Just make sure if your only replacing one that it is really close in diameter to the old ones that are left. Typically if one is worn to the point of being replaced the others are worn pretty bad also, meaning they are way smaller in diameter than a new one. That said, putting a new roller in place of an old one will cause the new roller to be higher than the old ones. This extra height will cause the majority of, or on hard flat ground the whole weight of, the machine on that one roller instead of spreading it between all of them as should happen when they"re all the same diameter. So, if your just replacing one at the time your much better off finding a used one than shelling out the money ofr a new one that"s gonna wear out prematurely.