Need Tines for Landscape Rake

[Tim in New York]

I have a 6' International Machinery Corp rake that needs some new teeth. They are 3/4" wide and have no holes. There are spacers between the teeth that bolt to the frame - the spacers act keep the teeth from sliding sideways, and the bolts holding them clamp two pieces of steel together to hold the teeth to the frame. I can find lots of replacements, but all are 1" wide. Any ideas on where I could find these? Otherwise I guess I have to try to modify something and that will not be real easy.

I did find out the company was bought by Hawkline, but a call to them was no help. The rake is probably 25+ years old.

Thanks,
Tim

 

[RickB]

I?m pretty sure York has discontinued their 3/4? tines. You may be SOL.

 

[charlie n]

These have holes but are the width your lookin for. Chick the link or Google Woods #10561.


https://www.messicks.com/wo/94235[url]

 

[Tim in New York]

Thanks! will track this down and try to determine if they will fit.

Tim