Main baler, no significant issue last year, typical finger carriage wear so have spare bearings, had knotter grab/rip issues couple years ago, but last year only had knotter fails when I tried Massey twine, so waited and picked up NH twine and no more issues, some sign of knotter drag (twine residue), so I'll give it an extra clean/grease.
Back Up Baler, also 273, ripped/failed right side knot every 5 bales, so I picked up new knives to replace. But old are ~ 3/32 thick and dull, and new are ~1/32. Do I have to make any adjustment for this?
Back Up Baler, also 273, ripped/failed right side knot every 5 bales, so I picked up new knives to replace. But old are ~ 3/32 thick and dull, and new are ~1/32. Do I have to make any adjustment for this?
