non running jubilee update

[ericlb]

i feel like a 5 year old , the problem turned out to be simple, i would have found it sooner if i had pulled the carb plug and waited longer, it did have good flow, but only as far as what was in the float bowl, the gas valve would let fuel thru, but not enough i repaced what was the factory gas valve with one i got from carquest, it wasnt near the quality as the original and built completly different but with a little redesigning i had it on and working, [ after i fixed 2 big leaks on the brand new valve], now she runs fine, now does anybody know how the original is supposed to look down inside the screen? im going to try to clean mine out and up i got a feeling the one from the china man wont be working long, the needle ect on the original one is clean but the flow is restricted up inside somewhere, thanks for all the help

 

[r geiger(oR)]

Mine had the long stem plugged with gunk. got it cleaned out but the threads were stripped and had to replace anyway. I ussed wire and air and got it pretty clean. Also the reserve holes were plugged also.

 

[Hubert(tx]

on my JUB I spraid first with berrymen 12 thin soked it in sea foam for a couple hrs, using small bottle brush&tooth brush put it back on and added one gal of gass with 2oz.per gal. sea foam &berry12Each time i start it she gits better.