Oil Filter Adaptor

We now have the Oil Filter Adaptor made for the MM engines taking the obsolete agco, wix, napa, Baldwin cartridge type filter. (Napa number 1111) on 283, 403. ect. We have made a machined threaded piece to replace the long stud in filter. No drilling required. Screw on a $14 spin on filter the same height as the old canister filter. Looks good. If interested email me. $ 40 plus shipping. I will get some pics of it on here soon.
 
The Spin on filter is a Napa 1791 used on alot of Cat engines. It cost around $14. You can get a few other filters that are shorter with the same gasket demensions that are around $30.
 
Ok, thats a B76 Baldwin for Mack App's Or B7600 Baldwin for Cat app's I'm sure the older Mack spec's are fine for us......
 
The R and Z Housings are alot smaller in Diameter. The chevy oil fitler gasket does match up with it. I saw the guy on ebay selling those for the r and z for $40.
 
I have six adapters on hand for replacing the oil filter on the R/Z tractors with a spin-on big block Chev filter. They are $30 plus $5 for shipping. I sold about 40 of these so far with no returns. I don't have anything for the U/G tractors.
Nice to see those Molines still being used!
Loren
 
I put a filter on for a 1970 chevy smallblock and does not leak I pull this tractor and have not had a problem at all. I got my adapter from Wendell Everett, for twenty dollars.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top