Oil slinger

[Sawatch 8N]

Have been consulting Hobos site for engine rebuild, He says:

"...oil slinger on the end of crank before you put the timing cover on..."

Can someone show a pic of the "oil slinger"? not seeing it in the manual & don't recall having one on my '52 8n motor.

Thx

 

[GB in MT.]

[b:5a98bd6737][i:5a98bd6737]

Try this pic.! Follow the yellow arrow, to the cupped looking washer....that would be it!!! :

Page# 111 fig.167 listed as part#26, in the 150 page, FO4 manny

Gary [/i:5a98bd6737][/b:5a98bd6737]

 

[Bob]

NH on-line parts shows it, although not clearly, part # 406310A Slinger, Crankshaft Oil, Years: 01/01/1939-12/31/1952.

<img src = "http://i52.tinypic.com/eun98z.jpg">

It appears to still be available through your friendly New Holland dealer for a little over three bucks!

 

[TheOldHokie]

(quoted from post at 12:03:54 11/24/10) Have been consulting Hobos site for engine rebuild, He says:

"...oil slinger on the end of crank before you put the timing cover on..."

Can someone show a pic of the "oil slinger"? not seeing it in the manual &amp; don't recall having one on my '52 8n motor.

Thx

It's just a keyed sheetmetal disk that fits on the end of the crankshaft. It throws oil off the circumference as the crank spins.

TOH

 

[lha]

Without the oil slinger,there will be increased oil on the front seal and decreased oil on the gears.---lha

 

[Sawatch 8N]

Thx, now I see how it looks/works. Checked with machine shop and it's installed.