Oliver plow model???

[wareagle22]

I got this 2 bottom plow in a package deal and am pretty sure it is an Oliver from a google search but cannot find the model number. I want to buy new shins and shares for it but need the model number before I can order them. Somebody along the way welded a new share point on the existing share and shin so Im having to grind that off to be able to remove the old share. The plow is in really good shape for its age so Id like to restore it. Any info would be greatly appreciated.

 

[wareagle22]

I forgot to add that it is a 16 as I can read some of the info on the old share. It says Star Manu. R16R on it

 

[Matt(NEIA)]

Oliver model 3240 maybe?

 

[Matt(NEIA)]

 

[caterpillar guy]

Will take less grinding to just cut the bolt off holding it on. they will probably be shot for threads anyway. New bolts cost a bit but for 2 bottom and new points and shins I would just bite the bullet on it. I used to weld an old used point to the one bolted on pushing it ahead and below, the one on there. For the first set of the year would last pretty good and would set it so there was just a bit of suck to it. Last about 70-100 acres where as the new set would only last about 40 in summer plowing and about 60-70 in spring. This was if I was lucky on 6-16's. I used to cut strips out of the old moldboards to use for wear plates on the shins too. Used up a lot of old plow parts that way. Corn stalks plowed the same either way.

 

[Leroy]

Adjustable frame width that can be set for 12,14 or 16 and different bottoms used depending on how you want. Had the 3 bottom version and frame set for 16 but the bottoms were actually 14. Found out that when a moldboard broke and in finding a replacement correct moldboard was from a non adjustable frame pull type 14 only plow. And deep suck shares were not avaible for the oliver plows so taking a part of old share and welding on to a worn out blade share made our own deep suck shares. Those blade type shares on a 3 bottom plow would be wore out in 30 acres and not penetrate the hard soil.

 

[Barry Simon]

3241

 

[plowman]

Hi I have manuals and parts. Thanks Steve 419-618-0017

 

[plowman]

Hi I have manuals and parts for Oliver plows. Thanks Steve 419-618-0017