steve19438
Well-known Member
heard somebody talking today about a "double tongue" wagon hitch. used mostly to move hay wagons with a tractor. can someone explain this to me ? pics ?
(quoted from post at 16:35:02 12/21/17) heard somebody talking today about a "double tongue" wagon hitch. used mostly to move hay wagons with a tractor. can someone explain this to me ? pics ?
We use one all the time at my Pappys. It is basically a pipe with a hitch on each end. You then hook it to the back of the wagon and the back of the tractor and push it in. Some one still needs to steer the wagon tongue. Most of our kicker wagons do not have a door in the back so it makes it easier to unload.(quoted from post at 21:35:02 12/21/17) heard somebody talking today about a "double tongue" wagon hitch. used mostly to move hay wagons with a tractor. can someone explain this to me ? pics ?
(quoted from post at 18:18:56 12/22/17) A lot of guys put a hitch on the front and backed them in with that. For most it was easier than learning to back 1.
I had to learn to back a wagon at the age of 12, Dad had passed away and Mom and us 4 kids were keeping the farm going as that was all we knew.(quoted from post at 10:34:14 12/22/17) that was talent i never mastered. my old man would get so mad at me. only made matters worse.
(quoted from post at 23:10:20 12/22/17)I had to learn to back a wagon at the age of 12, Dad had passed away and Mom and us 4 kids were keeping the farm going as that was all we knew.(quoted from post at 10:34:14 12/22/17) that was talent i never mastered. my old man would get so mad at me. only made matters worse.
I had loaded the wagon with corn and oats and went to the elevator to get it ground, the old men standing around just about died laughing as I kept working, finally got it close enough to load the sacks of feed. Told myself that was not going to happen again, think I burn't over a tank of fuel in the 2N as I practiced at home, next time we need feed ground their jaws just about hit the floor as some did not get there in time from the coffee table to watch. Those that did gave me a pat on the back.
(quoted from post at 04:59:27 12/24/17) After sixteen years of "practice," I can back a hay rack about 30-50' before balling things up completely and having to start over.
I normally hitch to the front bumper on the 8N, though. The comment above about a heavy load 'steering' the tractor is spot on - there's a certain angle beyond which I know I'm going to lose traction on the three-ribs.
In fact, that same idea also seems to be the trick to backing a rack (at least to me) - input angles have to be kept tight!
es
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy