OT Old Light Switches

super99

Well-known Member
My daughter's house has these old style switches in it and she needs a couple of cover plates and new switch. Does anyone know if they are still made and where can you buy them if so? I'm not very excited about cutting into the wall and adding another box so they can be changed over to the newer style. Any suggestions? Chris
CarterLucas6-14-09024.jpg
 
I have those. As they go bad, I change them out for the modern ones.....no problem...two wires and a ground and the new ones fit right into the box. A single switch is easy, a double requires a second box.
 
Thanks, I checked it out and that looks like what she needs. I usually look at Menard's, and hadn't seen them there. Chris
 
Those look to me like they're from the "Despard Series" by P&S.

<img src = "http://www.electricsupplyonline.com/img_prod/026/FW026965.jpg">


There is the metal holder, then you insert the type of switch or receptacle that's needed and bend some tabs to hold them in place.

GOOGLE will turn up all sorts of places to buy them.
Despard
 
Menards should have them but I know The electrical department my Wife runs in Lowes has them in the combination models. Single and receptical, 2 singles and single with a three way. Take plenty of money tho as they are very expencive.
 
I didn't know the name myself, but you need a four despards switch plate. Yours looked like what you get in a bathroom heat,light,fan switch, but I've never seen them in a four. I attached a site that shows that configuration but I don't know if they have them.
I personally would get a blank double plate and drill/cut holes in it.
switch
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top