baldwin racing
Member
Here is a pic of the old steering shaft and steering wheel.......
2nd pic is the new steering wheel shaft and wheel and universal slid into place......I have to slide the two collers and the top steering pedestal piece on before welding it up...
3rd pic I took the org. universal and I cut the org. shaft flush, I then drilled 3/4 hole in center made a 3/4 slug and welded it in.....now the 7/8 chromoly can slide over it....one it will hold it straite 2 it will strengthen the steering...
kelly
2nd pic is the new steering wheel shaft and wheel and universal slid into place......I have to slide the two collers and the top steering pedestal piece on before welding it up...
3rd pic I took the org. universal and I cut the org. shaft flush, I then drilled 3/4 hole in center made a 3/4 slug and welded it in.....now the 7/8 chromoly can slide over it....one it will hold it straite 2 it will strengthen the steering...
kelly